Eng 简体

nPM1304 Power Management IC

Highly integrated with unique system management features for small size batteries

The nPM1304 is a highly integrated multifunction Power Management IC (PMIC) that includes battery charger, an algorithm-based fuel gauge, two ultra-efficient step-down buck regulators, two LDOs / load switches, and comprehensive system management functions into a single device. It supports battery charge current as low as 4 mA. The nPM1304 reduces the bill of materials by replacing multiple discrete components while enabling greater design flexibility through a fully I²C-compatible TWI interface. 

The nPM1304 includes an algorithm-based battery fuel gauge solution with state of charge and state of health reporting. It is highly accurate, consumes ultra-low power and does not require any extra components. A rich set of system management features including a hardware watchdog, power-loss warning, hard-reset supervisory circuit, failed-boot recovery, ship and hibernate mode.A  

nPM1304 Datasheet [PDF | HTML] 

Battery management 

  • Linear battery charger 
    • Supported battery types: Li-ion, Li-poly, and LiFePO₄ 
    • Charge current: 4 - 100 mA 
    • Charging termination voltage: 3.5 – 4.45 V 
      • 50 mV termination voltage steps 
    • Battery input voltage: 2.3 - 4.65 V 
    • Dynamic power-path 
    • JEITA compliant 
    • NTC battery thermal protection 
  • Fuel gauge including battery health 
    • State of charge, state of health and cycle tracking 
  • System regulator 
    • USB type-C compliant with 100 mA, 500 mA, and 1500 mA current limit 
    • Input voltage: 4.0 – 5.5 V 
    • 22 V overvoltage protection 
    • Unregulated system rail 
      • Output voltage: 3 – 5.5 V  
      • Output current: 100mA (from battery), 1.5A (from USB) 

Voltage regulators 

  • Two buck regulators 
    • Output current: 200 mA 
    • Output voltage: 1.0 – 3.3 V 
      • 100 mV steps 
    • Automatic hysteretic and PWM mode switching, or forced PWM mode 
    • Power conversion efficiency up to 93% 
  • Two LDOs / load switches 
    • Output current: 50 mA (LDO) / 100 mA (load switch) 
    • Output voltage: 1.0 – 3.3 V 
      • 100 mV steps (LDO)

System management

  • Hard reset (one or two buttons)
  • Watchdog timer
  • Failed-boot recovery
  • Power loss warning
  • Ship mode: 370 nA
  • Hibernate mode: 500 nA
  • Five GPIOs
  • Three 5mA LED drivers
  • I²C compatible TWI 
Ask us about this
Key features
  • Supported batteries: Li-ion, Li-Po and LiFePO₄ 
  • USB-C compatible charger 
  • Overvoltage protection 
  • Fuel gauge including battery health 
  • Two buck regulators 
  • Two LDOs / load switches 
  • Ship & hibernate modes 
  • Hard reset 
  • Watchdog timer 
  • Failed-boot recovery 
  • Power loss warning 
  • Five GPIOs 
  • Three LED drivers 
  • TWI configuration interface 

Evaluation kits

nPM1304 EK

The nPM1304 Evaluation Kit (EK) enables fast evaluation and code‑free configuration of the nPM1304 PMIC using the nPM PowerUP desktop application in nRF Connect for Desktop.

Read more

Software & tools

Nordic’s PMIC software and tools are designed to simplify power management development across Nordic and non‑Nordic MCUs. With ready‑to‑use drivers for Zephyr and bare-metal environments, a production‑proven fuel‑gauge algorithm, and powerful evaluation tools like nPM PowerUP, developers can evaluate, configure, and integrate PMICs quickly — moving fast from first prototype to final product.

The Software & Tools landing page brings together all software, documentation, downloads, and development resources needed to support PMIC‑based designs.

Read more
PMIC banner software.jpg

Download reference layout

for the nPM1304 PMIC

Selected version
1.0 QEAA layout and BOM resources

Changelog:

1.0 QEAA layout and BOM resources

Reference layout for the nPM1304 QFN package