Eng 简体

nRF9151 SMA DK Development kit

Development kit for LTE-M, NB-IoT, NTN, GNSS and DECT NR+

The nRF9151 SMA DK is a single-board development kit for the nRF9151 SiP, designed specifically for developers who require maximum performance and flexibility. It replaces internal antennas with SMA connectors for LTE-M/NB-IoT/NTN/DECT NR+ and GNSS, enabling direct connection to lab equipment or high-performance external antennas. This makes it the ideal platform for precise RF characterization, power measurements, and demanding field testing of applications using LTE-M, NB-IoT, NB-NTN, DECT NR+, and GNSS.

Key Features:

  • Maximum RF Flexibility: Dedicated SMA connectors for LTE/NTN/NR+ and GNSS enable conducted measurements with lab equipment or connection of external antennas for optimized field test performance. (Antennas included with the kit for NTN/LTE-M/NB-IoT and GNSS)
  • Comprehensive Connectivity: Powered by the nRF9151 SiP, the kit supports NTN, LTE-M, NB-IoT, DECT NR+, and GNSS. It is the recommended kit for developing and evaluating direct-to-satellite solutions.
  • Flexible SIM Technology: Features both a nano/4FF SIM card slot and an MFF2 SIM footprint, providing support for traditional plug-in SIMs as well as soldered eSIMs or software iSIMs. (SIMs supporting terrestrial and NTN is included with the kit)
  • Extensive Prototyping Options: Full access to all GPIOs and interfaces is available via connectors. Arduino Uno Rev3 compatibility enables easy integration with a wide range of third-party shields, including the nRF7002 EK for adding Wi-Fi locationing capabilities.
  • On-Board Debugging: An integrated SEGGER J-Link debugger allows for programming and debugging the onboard nRF9151 SiP and can also be used to program and debug external targets.
  • User Interface: Includes four user-programmable LEDs and four buttons for direct user interaction and status indication without additional hardware.

PDF IconDownload nRF9151 SMA DK product brief (PDF)

Ask us about this
Key features
  • SMA connectors for lab equipment or external antennas
  • Supports LTE-M, NB-IoT, NTN, DECT NR+, GNSS 
  • Arduino Uno form factor
  • 4 LEDs user-programmable
  • 4 buttons user-programmable
  • SEGGER J-Link OB Debugger with debug out support
  • UART interface through VCOM port
  • USB connection for debug/programming and power
  • Includes high-performance Taoglas (LTE/NTN/NR+) and Kyocera (GNSS) antennas.
  • Bundled with IoT SIM cards with trial data for immediate terrestrial and satellite connectivity
Documentation
Downloads
Evaluate NTN

nRF9151 SMA DK application and modem firmware

Selected version
nrf9151dk_mfw-2.0.4_sdk-3.2.1 [Latest Version]

Changelog:

nrf9151dk_mfw-2.0.4_sdk-3.2.1 [Latest Version]

Changelog:

  • Includes FW from nRF Connect SDK v3.2.1
  • Includes Modem Firmware v2.0.4

The following samples and applications are part of the package:

 

nrf9151dk_mfw-2.0.2_sdk-3.1.0

Changelog:

  • Includes FW from nRF Connect SDK v3.1.0
  • Includes Modem Firmware v2.0.2

The following samples and applications are part of the package:

 

nRF9151 SiP NTN firmware 

Programming app available in nRF Connect for Desktop

Selected version
1.0.0 nRF91 firmware binaries

Changelog:

1.0.0 nRF91 firmware binaries

Note:

MFW_nRF9151-NTN is only compatible with nRF9151 LACA A1A (module labeled: nRF9151 LACA A1)

It is not compatible with nRF91 devices: nRF9151 LACA A0A, nRF91M1, nRF9161, nRF9131 and nRF9160.

V1.0.0 feature summary:

  • 3GPP R14 LTE-M and NB-IoT - Feature baseline MFW_nRF91x1_2.0.4
  • Selected 3GPP R17 IoT-NTN (NB-NTN) features
  • GPS/QZSS
  • IPv4/6
  • TCP/UDP
  • NIDD

This release aligns with v1.0 of the nRF91x1 NTN AT Commands Reference Guide.

A Complete list of functionality, changes, and bug fixes in v1.0.0 of this firmware can be found in the release notes found inside the .zip file download.

To get started with NTN and this firmware, please go to our evaluate NTN page to find additional documentation and links to technical material and support from different NTN providers.

Hardware files

Selected version
1.1.0 Layout and BOM resources

Changelog:

1.1.0 Layout and BOM resources

  • First release for nRF9151 SMA DK (PCA10201)

nRF91x1 SiP DECT nr+ firmware

For access please contact Nordic sales or support

DECT NR+ Firmware Binaries


The official DECT NR+ firmware binaries can be accessed by contacting Nordic Sales, check the changelogs for more information what the different version has introduced.

  • Changelog: MAC and PHY v2.0.0

     

    • This release introduces comprehensive DECT MAC (Medium Access Control) layer functionality, building upon the existing PHY layer capabilities.
      This release supports star network topology.

      This release supports: nRF9151 LACA A0/A1 SiP

      This firmware supports the "Release 2 of the DECT-2020 New Radio (NR) technical specification v2.1.1"

      DECT NR+ operation is enabled on frequency bands 1, 2, 3, 4*, 9 and 22. (*only on the nRF9151).

       

      Highlights:

      The MAC layer provides high-level network management, device association, and data communication services for DECT-2020 NR applications.

      • Network Management: Full star network topology support with network/cluster management, discovery, and RSSI scanning.
      • Device Communication: Association management with up to 6 concurrent flows, using RACH (uplink) and paging (downlink).
      • Data Link Control (DLC): Four service modes (Transparent, Segmentation, ARQ) with advanced flow control.
      • Advanced MAC Features: Link adaptation (MCS & power), HARQ, MAC-level security (Mode 1), IPv6 support, and configurable power saving (PT mode).
      • Operational Modes: Supports Fixed Termination (FT) parent and Portable Termination (PT) child roles.
      • Clock Synchronization: Clock synchronization to external 1PPS input and 1PPS output generation.

      A complete list of new functionality, changes and bug fixes is in the release notes found here or inside the .zip file.

      This release is aligned with v1.3 of the nRF91x1 DECT NR+ AT Commands Reference Guide.

      It is advisable to use the latest version of nRF Connect for Desktop and nRF Connect Programmer tools.

      Some features require support from the nRF Connect SDK, and it is recommended to ensure compatibility with the appropriate version of the SDK.
      Customers are encouraged to use NCS/main. The nRF Connect SDK release v3.3.x. will support the API fully.

       

  • Changelog: PHY only v2.0.0

     

    • This release includes PHY layer only.
      This release supports: nRF9151 LACA A0/A1 SiP

      This firmware supports the "Release 2 of the DECT-2020 New Radio (NR) technical specification v2.1.1"

      DECT NR+ operation is enabled on frequency bands 1, 2, 3, 4*, 9 and 22. (*only on the nRF9151).

      Highlights:

      • L1 Control: Refactored for improved maintainability.
      • Clock Synchronization: Added support for external 1PPS input and 1PPS output generation.
      • General Improvements: Includes various bug fixes and removal of unnecessary AT commands.

      A complete list of new functionality, changes and bug fixes is in the release notes found here or inside the .zip file.

      This release is aligned with v1.3 of the nRF91x1 DECT NR+ AT Commands Reference Guide.

      It is advisable to use the latest version of nRF Connect for Desktop and nRF Connect Programmer tools.

      Some features require support from the nRF Connect SDK, and it is recommended to ensure compatibility with the appropriate version of the SDK.
      Customers are encouraged to use NCS/main. The nRF Connect SDK release v3.3.x. will support the API fully.

       

  • Changelog: PHY only v1.1.0

     
    • • Enabling a 1-slot turnaround time for PHY operations in low-latency modes
    • • Added support for adding and removing scheduled operations
    • • Enhanced support for various radio modes to improve power consumption across different use cases.
    • • Added reporting of turnaround times for different radio modes.
    • • Introduced support for DECT NR+ band 4, available on the nRF9151 LACA A0 and nRF9151 LACA A1.
    • • Add support for 21 dBm output power on bands B1, B2, B9, and B22, available on the nRF9151 LACA A0 and A1.
        Note: Output power on Band 4 is limited to 19 dBm.
    • • Included battery voltage values in PHY operation callbacks.
    • • Added operation handle values for all PCC and PDC reception callbacks, simplifying packet identification for RX operations.